Options
SOLITEX PLUS
Vapour permeable roof underlay
SOLITEX PLUS is the next generation of high performance vapour permeable underlay. With an impressive range of characteristics such as high vapour permeability, extreme water tightness, high nail tear resistance and thermostability, SOLITEX PLUS offers superior protection against condensation risk and extreme resistance against pelting rain. Solitex PLUS from pro clima is a diffusion-open vapour permeable membrane. SOLITEX PLUS contains a monolithic membrane which employs Closed Cell Technology compared to conventional microporous membranes. Closed cell membranes offer superior weather-tightness, and at the same time ensure that a significant amount of water vapour is actively removed from the inside of the building structure and diffused to the exterior. The combination of these two properties is the determining factor when it comes to quality and the safety of the roof construction.
Key features
- Totally resistant to all wood preservatives, wood treatments or natural wood resins
- Extreme resistance to wind-driven pelting rain
- Totally resistant to contamination due to on site chemicals
- Extremely nail-tear resistant >300N
- Extremely water-tight >2500mm
- High physical strength
- High vapour permeability
- Four ply layer
- Resistant to ageing
- Lightweight for ease of handling
Tip: For sealing solutions we recommend Tescon No1,Duplex or Tescon Profil.
SOLITEX WA
Vapour permeable wall lining membrane
SOLITEX WA is a tough, breathable membrane specifically designed to protect and enhance timber frame structures. It can be applied in the factory to the external face of pre-fabricated
wall-panels, or on-site to timber frame wall assemblies.
Features
- Spun-bonded high density polypropylene non-woven micro-fibre fleece.
- Optimum protection for the structure against driving rain, snow and dust during construction.
- Continues to protect the structure against excessive damp and any water ingress that may penetrate the outer cladding.
- Contributes to an overall moisture control solution for timber frame structures.
- Protects exterior sheathing material in a timber frame wall construction from excessive dampness and degradation which may otherwise be caused by water ingress, while at the same time allowing the sheathing material to breathe in order to prevent mould or other fungal growth.
- In locations of extreme exposure overlaps of pro clima SOLITEX WA can be sealed with a pro clima Duplex double-sided tape or pro clima TESCON NO1 single-sided tape.
- Offers high UV stability
- Available in a large range of dimensions and colours and is IAB certified.
- Black colour reduces the risk of visibility through timber cladding.
Tip: For sealing solutions we recommend Tescon No1, Duplex or Tescon Profil.
