Options
ECO COLL
ECO Coll is a natural glue adhesive used in conjunction with DB+ to create a 'natural' airtightness layer. This product is solely for use with DB+ and should not be used with INTELLO or INTELLO PLUS.
Key features
- Airtight jointing of vapour barriers made from building paper to each other and to adjoining construction elements, e.g. DB+.
- Vapour barriers and air seals made of building paper, combined with ECO COLL natural latex glue are the ecological solution for air sealing.
ORCON F
Orcon F has exceptionally high adhesion properties while also being elastic. Its outstanding adhesion to building materials gives the joint the necessary safety and longevity. It is suitable for bonding all of the pro clima vapour checks and air-proofing membranes, PE/PA/PP and aluminimum foils to other building materials regardless of smooth, rough or smooth stony surface. Unstable or crumbling surfaces either need to be removed or sanded and stabilised using Tescon Primer RP. An easy press extrusion gun is available with 600ml refill tubes - please contact for further details.
Key features
- High strength on building material substrates.
- Airtight bonding in accordance with DIN 4108-7, SIA 180 and ONormB8 110-2.
- Airtight outdoor joints, e.g. vapour check for external roof insulation or sub-and-top reburbishment vapour check for re-roofing
- Wind-proof bonding of roof underlay and facade membranes
- Great resistance to high humidity on site
Tip: The pro clima range of glues and tapes is designed to provide the tightest seal - if they are inadvertently stuck to an area they shouldn't be, we do supply Glumex, a water-based solution to remove the adhesive. Please contact Green Building Store for further information.
TESCON PRIMER RP
Priming coat suitable for wood fibre boards. Tescon Primer RP is a priming coat suitable on wood, woodfibre boards, block structure, roof structure, walls and concrete floors. Tescon Primer RP is recommended for the preparation of the surface for the application of pro clima tapes such asTESCON NO1, TESCON VANA, and TESCON PROFIL, as well as the adhesive compounds ORCON F and ECO COLL. For a permanent connection the surface should be smooth, dry and stable. Surfaces should be cleaned from any loose materials, dust or sawdust (broom clean). Application of Tescon Primer is not possible on frozen surfaces. Surface must be suitable for priming. Concrete, sand and cement or skimmed surfaces must be fully cured and dried before Tescon Primer RP can be applied.
Key features
- No drying required - bonds even on wet surfaces
- Deep penetration in substrate
- Strengthens the substrate
- Solvent free
- Suitable with all pro clima tapes.
Tip: Shake bottle well before application. For speedy application no drying of primer is required,
bonding to wet primer is possible using Tescon No1 or Tescon Vana.